Angle analysis of angular contact ball bearing
Angular contact ball bearing is an important type of ball bearing. Today, we will introduce the angle of angular contact ball bearing. This angle is the angle between the direction of bearing force and the vertical line. The angles are 15 degrees, 25 degrees, 30 degrees and 40 degrees.
Generally speaking, the 15 degree angular contact ball bearing has high accuracy and high speed, mainly bearing radial force and a small part of axial force. The 25 degree angular contact ball bearing and the 30 degree angular contact ball bearing bear more radial force than the 15 degree angular contact ball bearing, while the 40 degree angular contact ball bearing has the largest radial force, which is suitable for occasions with large axial load and vertical installation. At the same time, it can be seen that the radial force or axial force borne by angular contact ball bearings are different with different angles. The smaller the angle of angular contact ball bearing, the greater the radial force the bearing bears, and the smaller the axial force.
There are requirements for the same type of bearing, different angles, different sizes and specific application occasions. If you have any questions about the selection of bearings, you can consult FV Bearing. We are a professional bearing supplier and hope to be your partner.
Scan the QR code and push it to your mobile phone for access.
Copyright statement: This article is published by BLOG - FV BEARING INDUSTRIES, if you need to reprint, please indicate the source.
本文链接:https://blog.fv-bearing.com/Blog/Angle analysis of angular contact ball bearing/