Introduction to the structural advantages of combined bearings
Combined bearing, was first designed by Europeans. It is installed by a combination of radial and axial bearings. The combined bearing is used in forklift masts, mobile handling systems and lifting systems.
Combined bearing is a full complement cylindrical roller bearing used in forklift masts. The combined roller bearing simplifies the structure, effectively saves the installation space, and is convenient to use. It only needs to weld the shaft head in the hole of the installation plate, and it is not necessary to disassemble the entire bearing, and the accessories are highly replaceable, which is very convenient for users.
Combined bearing mainly include: main roller; side roller; shaft head; cover plate.
Assembly method of combined roller bearing:
The side rollers are installed inside the shaft head through the mandrel, the main roller is sleeved outside the shaft head, and the cover plate is fixed by a nut at the end of the shaft head, and finally several parts are fixed together.
Advantages of combined roller bearings:
Can accept high radial and axial loads;
Robust guide rails, suitable for high dynamic and static loads;
The bearing capacity can be well distributed on the guide rail;
Long service life of bearings and guides;
It can be assembled by welding bolts, which is economical and practical;
Bearing components are easy to replace; reduce design and production costs.
If you have any require and questions for combined bearing, welcome to contact us!
Scan the QR code and push it to your mobile phone for access.
Copyright statement: This article is published by BLOG - FV BEARING INDUSTRIES, if you need to reprint, please indicate the source.
本文链接:https://blog.fv-bearing.com/Blog/Introduction to the structural advantages of combined bearings/